If you'd rather place an order by talking to one of our cheerful order desk clerks, please call 1-888-232-4444 (USA and Canada only) or 250-383-6864. From Europe, ring our UK order desk clerk at local rate number 0845 230 9601 (UK only) or 44 (0)1865 722 113.

Compound Miter The Bevel and Miter Answer Book

by Eddie Pinto

280 pages; quality trade paperback (softcover); illustrated; catalogue #05-1364; ISBN 1-4120-6453-8; US$24.95, C$31.19, EUR20.27, £14.05

Finally, a field reference book that contains all the answers needed for cutting compound miters such as crown moldings. The miter and bevel answers to any inside or outside corner.

Read more!

About the Book      About the Author      Excerpts      Catalogue Information

About the Book

Compound Miter the bevel and miter answer book, contains all the answers needed for cutting compound miters and crown moldings. Designed with easy to read charts calculating the cuts using the formula inside corner angle or outside corner angle with spring angle equals miter and bevel angles. Questions throughout cutting a compound miter and crown molding are basically what to set the saw's miter angle and bevel angle at. Each of the 360° inside and outside corner angles, in increments of 1°, are divided into spring angles from 1° thru 90° also in 1° increments. That's 32,400 miter answers with 32,400 bevel answers for any corner in question throughout cutting compound miters and crown moldings. Besides the answers to cutting inside and outside corners as compound miters or crown moldings, the book also answers questions in the other areas concerning theses cuts. There's easy to read charts for unknown corner angles containing the answers to all 360° of the inside and outside corners in increments of 1°, using the method of measuring. There's also easy to read charts for unknown spring angles containing the answers in increments of 1/4", from 1/4" thru 14" rise and 1/4" thru 14" run, using the method of measuring. That's 3,136 answers to any spring angle using material or crown molding up to 19 3/4" wide. Inch conversion charts changing any decimal of an inch to fractions, centimeters, and millimeters in increments hundreds of an inch. Working charts for either a single bevel or a double bevel miter saw are also included. Each of these working charts have 6 steps. These steps range from which direction to place the material on the saw, which direction to turn the saw's bevel meter, to which piece of teh material to save for the installation. Complete, all answers to cutting compound miters and crown moldings.

---

About the Author

In the construction field for most of my career, I've always been in the finishes of all types of contructional projects. Most of my works were in the fields of trim carpentry and remodeling, but considered a craftsman of all trades of construction. Some of my specialties ranged from spiral stairs, multiple piece moldings, cabinet building, to architectural concrete and wood works. Today I'm a self taught draftsman drawing house plans in the $250,000 to $750,000 area. All of this through my experience of works, positive work attitude, and by the many blessings of God.

---

Excerpts

---

Catalogue Information

---